Jeep JK / JKU MOD Series Front Mid-Width Bumper with Brush Guard
2007-2018 Jeep Wrangler JK MOD Series Mid-Width Front Bumper with Brush Guard
SKU
6578
$1,252.99
• 100% US MADE
• Constructed using heavy-duty 3/16” steel, finished with a two stage powder coat (primer and finishing coat) for long lasting durability
• Recessed mount with included brackets for factory (or upgraded) Fog Lights, protects the lights from damage with an easy bolt-on installation and simple plug-and-play wiring; reusing the existing Fog Light wiring harness
• Includes accessory mount rail with pre-punched mounting slots
• Heavy-duty D-rings welded to both the outer skin, and also directly to the frame mounts of the bumper for superior strength
• Overall bumper width approximately 56-3/8”
• Overall bumper depth approximately 11” (14” with brush guard)
• Overall bumper height approximately 8-3/4” (15-3/4” with brush guard)
• Bumper weighs approximately 120 lbs
• Bumper design includes additional pre-punched slots for optional no-drill accessory mounting such as Warrior QuickLatch mounts, MOD Box and lighting fixtures
• This unique bumper configuration has smooth contours to avoid off-road snags and a sleek rugged look that compliments the Jeep’s natural body lines
• D-Ring shackles sold separately
• Integrated winch and fairlead mounts. • Direct fit for most standard 8,000 - 9,000 pound winches (including Warn Zeon series)
• NOTE: Due to variation in the Jeep's frame, some customers have reported needing to grind/clearance the frame mounts and/or modify hardware selection slightly to accommodate larger winches
• Built-in off-road jack lift points which double as bottle opener tabs, for all your outdoor/camping needs
• The integrated accessory rail spans the entire width of the 1-1/2” diameter .120” wall of the heavy-duty brush guard tube; providing endless mounting options for a wide range of accessories
• Accessory mounting slots will easily accommodate 1/2” threaded fasteners…large enough for most CB antennas, Flag mounts, and larger off-road light posts
• Welded sheet metal brush guard verticals include additional pre-punched accessory mounting slots along the front and back surfaces
• Accessory rail relief cutouts provide locations to wrap a strap around the tube, or a convenient hand grip location
• Constructed using heavy-duty 3/16” steel, finished with a two stage powder coat (primer and finishing coat) for long lasting durability
• Recessed mount with included brackets for factory (or upgraded) Fog Lights, protects the lights from damage with an easy bolt-on installation and simple plug-and-play wiring; reusing the existing Fog Light wiring harness
• Includes accessory mount rail with pre-punched mounting slots
• Heavy-duty D-rings welded to both the outer skin, and also directly to the frame mounts of the bumper for superior strength
• Overall bumper width approximately 56-3/8”
• Overall bumper depth approximately 11” (14” with brush guard)
• Overall bumper height approximately 8-3/4” (15-3/4” with brush guard)
• Bumper weighs approximately 120 lbs
• Bumper design includes additional pre-punched slots for optional no-drill accessory mounting such as Warrior QuickLatch mounts, MOD Box and lighting fixtures
• This unique bumper configuration has smooth contours to avoid off-road snags and a sleek rugged look that compliments the Jeep’s natural body lines
• D-Ring shackles sold separately
• Integrated winch and fairlead mounts. • Direct fit for most standard 8,000 - 9,000 pound winches (including Warn Zeon series)
• NOTE: Due to variation in the Jeep's frame, some customers have reported needing to grind/clearance the frame mounts and/or modify hardware selection slightly to accommodate larger winches
• Built-in off-road jack lift points which double as bottle opener tabs, for all your outdoor/camping needs
• The integrated accessory rail spans the entire width of the 1-1/2” diameter .120” wall of the heavy-duty brush guard tube; providing endless mounting options for a wide range of accessories
• Accessory mounting slots will easily accommodate 1/2” threaded fasteners…large enough for most CB antennas, Flag mounts, and larger off-road light posts
• Welded sheet metal brush guard verticals include additional pre-punched accessory mounting slots along the front and back surfaces
• Accessory rail relief cutouts provide locations to wrap a strap around the tube, or a convenient hand grip location
Write Your Own Review
Downloads
Related Products
ALSO AVAILABLE FROM THESE PREFERRED DEALERS
INDUSTRY EXPERTS For Over 30 Years
100% US MADE Quality Guaranteed
DRIVEN BY INNOVATION Specialists In Craftsmanship