Cart  

Jeep JL / JLU / JT MOD Series Mid-Width Bumper with Brush Guard

2018 - 2024 Jeep Wrangler JL / JLU MOD Series Front Mid-Width Bumper with Brush Guard
2020 - 2024 Jeep Gladiator JT MOD Series Front Mid-Width Bumper with Brush Guard

SKU
6538
$1,344.99
* 100% US MADE
* Constructed using heavy-duty 3/16" steel, finished with a two stage powder coat (primer and finishing coat) for long lasting durability
* Recessed mount with included brackets for factory (or upgraded) Fog Lights, protects the lights from damage with an easy bolt-on installation and simple plug-and-play wiring; reusing the existing Fog Light wiring harness
* Overall bumper width approximately 56-3/8"
* Overall bumper depth approximately 11" (14" with brush guard)
* Overall bumper height approximately 8-3/4" (15-3/4" with brush guard)
* Bumper weighs approximately 120lbs
* Includes accessory mount rail with pre-punched mounting slots
* D-Ring shackles sold separately
* Heavy-duty D-rings welded to both the outer skin, and also directly to the frame mounts of the bumper for superior strength
* Bumper design includes additional pre-punched slots for optional no-drill accessory mounting such as Warrior QuickLatch mounts, MOD Box and lighting fixtures
* This unique bumper configuration has smooth contours to avoid off-road snags and a sleek rugged look that compliments the Jeep’s natural body lines
* Integrated winch and fairlead mounts
* Direct fit for most standard 8,000 - 9,000 pound winches (including Warn Zeon series)
* NOTE: Due to variation in the Jeep's frame, some customers have reported needing to grind/clearance the frame mounts and/or modify hardware selection slightly to accommodate larger winches
* Built-in off-road jack lift points which double as bottle opener tabs, for all your outdoor/camping needs
* The integrated accessory rail spans the entire width of the 1-1/2" diameter .120 wall of the heavy-duty brush guard tube; providing endless mounting options for a wide range of accessories
* Accessory mounting slots will easily accommodate 1/2" threaded fastener's large enough for most CB antennas, Flag mounts, and larger off-road light posts
* Welded sheet metal brush guard verticals include additional pre-punched accessory mounting slots along the front and back surfaces
* Accessory rail relief cutouts provide locations to wrap a strap around the tube, or a convenient hand grip location
* May not be compatible with 2021 Rubicon 392 or 4Xe models
* For California residents: Proposition 65 Warning

Write Your Own Review
You're reviewing:Jeep JL / JLU / JT MOD Series Mid-Width Bumper with Brush Guard
Downloads
ALSO AVAILABLE FROM THESE PREFERRED DEALERS
 INDUSTRY EXPERTS For Over 30 Years
 100% US MADE Quality Guaranteed
 DRIVEN BY INNOVATION Specialists In Craftsmanship