BUNDLE INCLUDES

MOD SERIES FRONT BUMPER WITH BRUSH GUARD
P/N: 6537

* 100% US MADE
* Constructed using heavy-duty 3/16" steel, finished with a two stage powder coat (primer and finishing coat) for long lasting durability
* Includes Fairlead accessory mount rail with pre-punched mounting holes
* Heavy-duty D-rings welded directly to the frame mounts of the bumper
* D-Ring shackles sold separately
* Bumper design includes additional pre-punched holes for optional accessory mounting such as Warrior QuickLatch mounts, MOD Box and lighting fixtures
* This unique bumper configuration has smooth contours to avoid off-road snags and a sleek rugged look that compliments the Jeep's natural body lines
* Integrated winch and fairlead mounts
* Direct fit for most standard 8,000 - 9,000 pound winches (including Warn Zeon series)
* NOTE: Due to variation in the Jeep's frame, some customers have reported needing to grind/clearance the frame mounts and/or modify hardware selection slightly to accommodate larger winches
* Built-in off-road jack lift points which double as bottle opener tabs, for all your outdoor/camping needs
* The mountable built-in rail spans the entire width of the 1-1/2" diameter and .120" wall thickness heavy-duty brush guard tube; providing endless mounting options for a wide range of accessories
* Welded sheet metal verticals include additional pre-punched accessory mounting slots along the front and back surfaces
* Accessory rail relief cutouts provide locations to wrap a strap around the tube, or a convenient hand grip location
* May not be compatible with 2021 Rubicon 392 or 4Xe models

MOD SERIES REAR BUMPER WITH STEPS
P/N: 7555

* 100% US MADE
* Constructed using heavy-duty 3/16” steel and finished with a two-stage powder coat (primer and finishing coat) for long-lasting durability
* Heavy-duty D-ring shackle mounts are welded to both the outer skin and directly to the frame mounts of the bumper for superior strength
* Bumper design includes pre-punched slots for optional no-drill accessory mounting and can easily accommodate 1/2” threaded fasteners; large enough for most CB antennas, Flag mounts, and larger off-road light posts and fixtures
* This unique bumper configuration has smooth contours to avoid off-road snags and a sleek rugged look that compliments the Jeep’s natural body lines
* The Warrior MOD Series Rear Bumper is the perfect complement to Warrior MOD Series Front Bumpers
* Built in off-road jack lift points which double as bottle opener tabs, for all your outdoor/camping needs
* Standard Tow Receiver compatible – Integrated trailer wiring plug mount
* Integrated tube step provides a large and stable step surface that can be used to gain access to roof racks or the rear of the jeep
* Dimple die traction plates provide additional grip for wet and slippery conditions
* Step can be used as a seat or as a temporary spot to set larger items during trail repairs or camp preparation
* The step provides a raised location to help stay out of deep water/mud while attaching recovery gear to the rear of the jeep in submerged conditions
* The tube of the step provides a good hand grip location to push, pull, or lift during manual recovery
* A location to stand or bounce during a recovery when trying to load a corner for balance or traction
* Includes all necessary hardware for installation
* No drilling required – Bolt on installation
* Back up sensor compatible - some modification may be required - call/email for details