BUNDLE INCLUDES

MOD SERIES FRONT MID WIDTH BUMPER W/ BRUSH GUARD + D-RING MOUNTS
P/N: 6538

* 100% US MADE
* Constructed using heavy-duty 3/16" steel, finished with a two stage powder coat (primer and finishing coat) for long lasting durability
* Includes Fairlead accessory mount rail with pre-punched mounting holes
* Heavy-duty D-rings welded directly to the frame mounts of the bumper
* Bumper design includes additional pre-punched holes for optional accessory mounting such as Warrior QuickLatch mounts, MOD Box and lighting fixtures
* This unique bumper configuration has smooth contours to avoid off-road snags and a sleek rugged look that compliments the Jeep’s natural body lines
* D-Ring shackles sold separately
* May not be compatible with 2021 Rubicon 392 or 4Xe models
* Integrated winch and fairlead mounts
* Direct fit for most standard 8,000 - 9,000 pound winches (including Warn Zeon series)
* NOTE: Due to variation in the Jeep's frame, some customers have reported needing to grind/clearance the frame mounts and/or modify hardware selection slightly to accommodate larger winches
* Built-in off-road jack lift points which double as bottle opener tabs, for all your outdoor/camping needs
* For California residents: Proposition 65 Warning

MOD SERIES REAR BUMPER WITH STEPS
P/N: 6555

* 100% US MADE
* Constructed using heavy-duty 3/16" steel and finished with a two-stage powder coat (primer and finishing coat) for long-lasting durability
* Heavy-duty D-ring shackle mounts are welded to both the outer skin and directly to the frame mounts of the bumper for superior strength
* Bumper design includes pre-punched slots for optional no-drill accessory mounting and can easily accommodate 1/2” threaded fasteners; large enough for most CB antennas, Flag mounts, and larger off-road light posts and fixtures
* This unique bumper configuration has smooth contours to avoid off-road snags and a sleek rugged look that compliments the Jeep's natural body lines
* The Warrior MOD Series Rear Bumper is the perfect complement to Warrior MOD Series Front Bumpers
* Built in off-road jack lift points which double as bottle opener tabs, for all your outdoor/camping needs
* Standard Tow Receiver compatible
* The integrated step provides a large and stable step surface that can be used to gain access to roof racks or the rear of the jeep
* Dimple die traction plates provide additional grip for wet and slippery conditions
* Step can be used as a seat or as a temporary spot to set larger items during trail repairs or camp preparation
* The step provides a raised location to help stay out of deep water/mud while attaching recovery gear to the rear of the jeep in submerged conditions
* The tube of the step provides a good hand grip location to push, pull, or lift during manual recovery
* A location to stand or bounce during a recovery when trying to load a corner for balance or traction
* A convenient place to anchor ropes, straps, Guy lines, etc.
* Additional layer of protection from trail hazards and added coverage for tailgate mounted spare tires
* Warrior strongly recommends the additional MOD Series Rear Bumper License Plate Mount w/ LED Light to securely attach your rear license plate (Warrior Part # 1555)
* Includes all necessary brackets to mount
* Back up sensor compatible - some modification may be required - call/email for details * May not be compatible with 2021 Rubicon 392 or 4Xe models